PowerPLUS 42,5 N cement is traditionally known as Ordinary Portland Cement. Powerplus cement is utilized very efficiently in medium to large construction projects to optimize performance. These applications require good technical ability, quality control and experience to design concrete mixes.

Composition and Conformance

PowerPLUS 42,5 N is formulated from Portland Cement Clinker and interground with other constituents, in accordance to the requirements of the following standards adopted from the European Norm Standard EN 197 Part 1 – Composition, Specification and Conformity Criteria for Common Cements.

Characterisitcs

PowerPLUS 42,5 N is very effective for high strength concrete applications, particularly where high early strengths, quick setting and high 28 day strengths are an important consideration.

Applications

PowerPLUS 42,5 N cement has wide applications and is ideally suited where high concrete strengths and fast construction speeds are of essence. Its high strength performance makes it suitable for high strength structural concrete applications.

Reinforced Concrete

• High rise buildings and structures
• Bridges
• Fast track construction Projects
• Spun pipe manufacturing
• Post- tensioning and pre-stressing slabs and beams
• Pre- cast manufacturing
• Slip forming
• Silos
• Foundations

Medium Strength Concrete

• Concrete columns, suspended slabs, beams and water retaining structures.
• Brick and block making
• Domestic concrete

Civil Works

• Soil stabilization

ROADCEM is a pioneering Hydraulic Road Binder in East Africa. It has been designed and developed with the intent to stabilise and improve physical and mechanical properties of soil in road construction works. It can also be used for waste stabilisation. It is ideal for treatment and stabilisation of road bases, sub-bases, capping layers, subgrades, platforms for parking, airstrip runways and more.

Benefits

Longer open time of up to 6 hours

• Reduced probability of shrinkage cracks due to lower clinker content compared to OPC
• Reduced cost compared to OPC
• Can better adapt to specific job sites than OPC
• Lower carbon footprint formulations that aid in environmental sustainability
• Quality and reliability of the Hima Cement brand

Characteristics

Product type: Hydraulic Road Binder: Compressive strength 22.5MPa (N/mm2) minimum.

Conformity: Manufactured to meet the physical and chemical requirements of BS EN 13282-1 (European Norm) standards

Constituents: Clinker, Limestone, Clinker, Pozzolana

SUPASET 32,5R is a newly designed innovative cement specifically made for fast setting dark textured precast applications, better flowable concrete with less water addition, lower water.cement ratio, a key benefit for higher strength gain as well as lower cement dosage.

SUPASET 32,5R is manufactured out of the Hima Cement factory in Kasese, Uganda in accordance to the Uganda Cement Standard (US 310-1: 2016) adopted from the European Standard (EN 197-1).

It is manufactured out of carefully selected raw materials to give the cement a dark texture, low water demand as well as high rapid strength gain, achieving more than 40% of designed strength within 2 days after application.

Benefits

Due to its high early strength and rapid setting, SUPASET offers improved turnaround during production of precast products thus improving productivity and profitability in the precast business.

SUPASET 32.5 brings about rapid hardening, durability as well as value for money for end users in precast and concrete applications.

Applications

• Precast products like bricks and blocks, pavers, culverts, precast slabs, drainage plpes etc.
• Normal and reinforced concrete application.
• Darkened floor finishes.
• Rapid strength gain requirements

Fundi cement is a hydraulic cement designed for use in mortars for masonry construction. Plastering, rendering, stucco, brick laying, screeding, and others. Fundi cement is manufactured at Tororo grinding station in Tororo district and Hima plant in Kasese district.

Fundi cement is manufactured to conform to the strin- gent requirements of the Uganda National Bureau of Standards US 366-1, Masonry cement- composition, specification and conformity criteria.

TECHNICAL BENEFITS

• Easy to mix and apply
• Improved plasticity/workability
• Good water retention
• Good strength
• Durable

APPLICATIONS

• Masonry mortar works
• Brick and block laying
• Plastering
• Rendering and Screeds

MINECEM CEM II/B-SR 42.5L is a Sulphur resistant cement designed for the mining industry, produced at our plants in Namanve and Tororo.

It is the only Sulphate resistant cement on market designed to counteract the reaction of chemical attack in aggressive ground environments, conforming to US EAS 18:1.

Minecem is a response to a unique mining market need. A binder that has been specifically designed for paste and cemented rock backfilling of underground mine stopes.

APPLICATIONS

• Backfilling in mines
• Stabilization of dangerous wastes
• Good for concrete exposed to sulphate attacks

TECHNICAL BENEFITS

• Higher long-term strength and durability
• Minimal surface cracking due low heat of hydration

PowerPLUS 42,5 N cement is traditionally known as Ordinary Portland Cement. Powerplus cement is utilized very efficiently in medium to large construction projects to optimize performance. These applications require good technical ability, quality control and experience to design concrete mixes.

Composition and Conformance

PowerPLUS 42,5 N is formulated from Portland Cement Clinker and interground with other constituents, in accordance to the requirements of the following standards adopted from the European Norm Standard EN 197 Part 1 – Composition, Specification and Conformity Criteria for Common Cements.

Characterisitcs

PowerPLUS 42,5 N is very effective for high strength concrete applications, particularly where high early strengths, quick setting and high 28 day strengths are an important consideration.

Applications

PowerPLUS 42,5 N cement has wide applications and is ideally suited where high concrete strengths and fast construction speeds are of essence. Its high strength performance makes it suitable for high strength structural concrete applications.

Reinforced Concrete

• High rise buildings and structures
• Bridges
• Fast track construction Projects
• Spun pipe manufacturing
• Post- tensioning and pre-stressing slabs and beams
• Pre- cast manufacturing
• Slipforming
• Silos
•  
• Foundations

Medium Strength Concrete

• Concrete columns, suspended slabs, beams and water retaining structures.
• Brick and block making
• Domestic concrete

Civil Works

• Soil stabilization

Multi Purpose CEM IV/B-P 32.5N is a Portland Pozzolanic Cement with a wide range of applications in construction like mortar, plastering, domestic concrete, road construction, industrial floors, construction repairs, etc. Its good strength performance makes it suitable for both general purpose and structural concrete applications.

Characteristics

Multi Purpose 32,5N is a product that complies with UNBS for common cement. It is a CEM IV type cement in the strength class 32,5N. It is characterised by good high quality early strength, fast setting and bright colour.

Multi Purpose 32,5N is formulated out of:

Clinker, a key ingredient for strength development Pozzolana, a key contributor for concrete durability and long-term stability Gypsum for regulating setting time of cement mortar Multipurpose is manufatured in accordance with the Uganda Cement standard US 310 -1: 2016 adopted from the European Cement standard EN 197 – 1 and is permitted by the uganda National Bureau of standards

Structural Applications

Reinforced Concrete

• Suspended Slabs
• Beams
• Bases and Columns
• Water retaining structures
• Best for concrete classes (C15 to C30)

Medium Strength Concrete

• Driveways
• Light unreinforced industrial floors
• Mass concrete

Low Strength Concrete / Mortar

• Domestic poles and post foundations
• Mortar and plaster
• Brick and block making
• Pro- cast concrete members